Important Safety Information

Any item of equipment can be dangerous if it is not used correctly. Our staff will be glad to demonstrate the proper and safe use of equipment on request and customers are advised to take advantage of this service.


Safety Devices

The hirer must not disable or adjust any safety or protective device fitted to the equipment and must not increase any governed speed or working pressures.


Warning Notices

The hirer must not remove or obstruct any warning notice on the equipment.


Risk Assessment

Under health and safety legislation there is a general duty on employers to take reasonably practicable steps to ensure the health and safety of their employees and others, such as members of the public.

Employers also have a general duty to inform their employees of the risks to their health and safety associated with the work they do and the equipment they use. Selwood believes that when equipment is supplied there is no significant risk until it becomes operational. Once put in to use the degree of risk will depend upon the competency of the person and the circumstances in which the equipment is used. These matters are under the control of the hirer and as such should be taken into account when performing a risk assessment.


Safety Information Sheets

These are issued for the different types of equipment that Selwood supply and it is important that these instructions are read before using the machine. At Selwood, we value all our customers and therefore provide this information and assistance to ensure the safety of all operators and to outline the effective maintenance and reliability checks necessary to ensure trouble free operation.

It is the general duty of the hirer, under current health and safety legislation, to provide adequate training and instruction to all employees and the information that Selwood supplies is intended to supplement that requirement. Selwood can also offer a range of safety equipment.

In the event that a fault or breakdown should occur during the hire which may affect safety then the local Selwood Branch must be notified so that the equipment can be repaired or exchanged. Selwood cannot accept any responsibility if the hirer continues to use the equipment before repair. Selwood undertake to deal with such defects as a matter of urgency.

If at any time you require further information regarding any equipment please do not hesitate to contact your nearest Selwood "Access" Branch.









AERIAL WORK PLATFORM TRAINING

Powered Access Training

safety training is essential to prevent accidents. Safety training courses not only ensure that as an employer you comply with current legislation, but also educates your workforce with the neccesary competence, skills, information and certification to erect, use and operate equipment safely.

Choosing from a wide selection of approved subcontract instructors, Selwood provide you with a range of work and access related training which can be individualy tailored to suit your requirements. Courses can be either at an approved IPAF centre or a location of your choice.

Every applicant will require a safety helmet, boots and any neccessary PPE for the practical section. If training is to be held on site, a suitable room and opeartion area will be required.

Two passport size photographs and NI number for every applicant will be required. If successful the applicant will be entitled to the IPAF identity card that is valid for 5 years.

For futher information contact your local Selwood Powered Access branch.